Svært potent effektforsterker fra japanske TEAC som vil kunne drive de aller fleste høyttalere på markedet. Den leverer 2x130 W i 8 ohm, og kan også benyttes i bridge mode med 1x250 W. Enheten har et relativt lite fotavtrukk og flaten den tar opp er tilsvarende et A4-ark. Passer utmerket med NT-505 eller UD-505.
TEAC AP-505 effektforsterker
Svært potent effektforsterker fra japanske TEAC som vil kunne drive de aller fleste høyttalere på markedet. Den leverer 2x130 W i 8 ohm, og kan også benyttes i bridge mode med 1x250 W. Enheten har et relativt lite fotavtrukk og flaten den tar opp er tilsvarende et A4-ark. Passer utmerket med NT-505 eller UD-505.
- Hypex Ncore power amplifier module, tuned by TEAC
- 130W + 130W of max output power, or 250W in BTL mode
- 3 switchable output modes: Stereo, Bi-Amp and BTL (Bridge Tied Load/Bridged)
- Fully balanced circuit design, from input to output
- Power supply features large toroidal power transformer and Schottky barrier diodes
- Comprehensive protection circuitry (Current surge, Over-voltage, Over-heating)
- Patent-pending ‘Pin-point’ feet for easy installation (Japan Patent No.4075477, No.3778108)
- Large level meters
- XLR Balanced and RCA Unbalanced analog audio inputs
Spesifikasjoner:
Amplifier section
Maximum output power
- STEREO, BI-AMP mode 130 W + 130 W (4 ohms, 1kHz, JEITA)
- 90 W + 90 W (8 ohms, 1kHz, JEITA)
- BTL mode 250W (8 ohms, 1kHz, JEITA)
Rated output power
- STEREO, BI-AMP mode 115 W + 115 W (4 ohms, 1kHz, THD 0.8%)
- 70 W + 70 W (8 ohms, 1kHz, THD 0.8%)
- BTL mode 220W (8 ohms, 1kHz, THD 0.8%)
- Total harmonic distortion 0.0015 % (8 ohms, 1kHz, 12.5W, JEITA)
- Signal-to-Noise ratio 113 dB (8 ohms, 1kHz, IHF-A)
- Frequency response 10 Hz to 50,000 Hz (+0dB, –5dB, 8 ohms, 1kHz, 1W, JEITA)
Analog input section
- LINE IN (Balanced) XLR (2: HOT) x 1 pair
- Input sensitivity 1.3V (output 8 ohms, THD 1%)
- Input impedance 10k ohms or higher
- LINE IN (Unbalance) RCA (gold-plated) x 1 pair
- Input sensitivity 0.66V (output 8 ohms, THD 1%)
- Input impedance 10k ohms or higher
Output section
- Speaker terminals Screw type (gold-plated, compatible with banana-plug and AWG8) x 1 pair
- Compatible speaker impedance
- STEREO, BI-AMP mode 4 ohms to 16 ohms
- BTL mode 8 ohms to 16 ohms
General
- Operating power AC 120V, 60Hz (US/Canada)
- AC 230V, 50Hz (UK/Europe)
- Power consumption 106W
- Standby power 0.1W or less (at Auto-power saving mode)
- Overall dimensions (W x H x D) 290 x 84.5 x 271 mm / 11.4” x 3.3” x 10.7” (incl. protrusion)
- Weight 4.4 kg / 9.7 lbs.
- Operating temperature range +5°C to +35°C / 41°F to 95°F
- Operating humidity range 5% to 85% (no condensation)
- Storage temperature range -20°C to +55°C / -4°F to 131°F
Included items
- Power cord
- Cushion for feet x 3pc
- Owner’s manual (incl. Warranty)